Harris Atlas DVL400, Technical Manual

Page: 71 / 180

2/25/03 888-2473-001 3-11
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation
ATLAS Series™
3.5.3.1.1 Modulation Status and Input Status
Pressing the Modulation Status or Input Status button on the Exciter Setup screen
will take you to one of the screens in Figure 3-10. These screens read the
modulation and input settings from the exciters(s), allowing the settings to be
checked without connecting directly to the exciters with an external serial
connection. To change the settings will require a serial connection to the exciter and
use of the V-XCAST software. For more information on these settings refer to the
exciter manual. Note that optional Exciter B is not installed in this configuration and
is shown grayed out.
Figure 3-10 Modulation Status and Input Status Screens