Harris Atlas DVL400, Technical Manual

Page: 64 / 180

3-4 888-2473-001 2/25/03
WARNING: Disconnect primary power prior to servicing.
Section 3 Operation ATLAS Series™
3.4 GUI Home Page
The HOME screen shown in Figure 3-3 is the primary operator screen and the
default screen after boot up. The HOME screen contains the most important general
operator information such as:
a. System and Cabinet Forward and Reflected power
b. Drive chain selection and status
c.
ASI input selection and status
d.
Individual Power Amplifier (PA) Cabinet status
e.
AC line voltage. For 3 phase models, this is an average of all 3 phases. To see
the individual 3 phase line voltages press the Power Supply button.
f.
Transmitter Channel
Figure 3-3 Home Screen
It also has the global status and operation information at the top of the screen which
shows the transmitter status and if there are any faults present.
The HOME button is a software button located in the lower right-hand
corner of all 5 main menu screens for quick navigation to the HOME
screen in Figure 3-3. This screen can
only be accessed using the
software buttons on the touchscreen (there is no hardware HOME button). The
quickest way to access the HOME screen is to press any of the 5 hardware buttons
to the right of the display as there is a HOME button on each of those main menu
screens.
To Figure 3-4 on page 3-6
To Figure 3-12 on page 3-13
To Figure 3-20 on page 3-18
To Figure 3-26 on page 3-23
To Figure 3-30 on page 3-26