HappyJapan HCS3, Instruction Book

Page: 249 / 364

-S3 -120
23-1
SPECIFICATIONS • MAINTENANCE
23_1 V617
Speci fi cations
CAUTION: To prevent accidents.
When performing maintenance, be sure to disconnect the power cord.
Oiling
*1 Actual embroidery area will be restricted in accordance with inner frame size.
*2 Actual embroidery area will be restricted in accordance with shape of a cap.
Speci fi cations are subject to change without notice.
The machine will periodically prompt periodically for lubrication based
on the number of stitches sewn.
When powered on, the machine will display an icon and letter to
indicate that lubrication is necessary. 5-3
Place to oil
Place to oil
Please lubricate the speci fi ed oil locations according to the instructions
below.
Running the machine without proper oiling will damage the machine.
Lint will gather in and around the rotary hook. Rotary hooks then wear
which will cause the threads to break. Please clean lint with a brush
and run the machine idly for 2 ~ 3 minutes.
Voltage 1 phase 100V ~ 115V -10% ~ +5% 1 phase 200V ~ 230V -10% ~ +10%
Electricity consumption 220 W 220 W
Frequency 50 / 60Hz
Short Circuit Rating 200A
Noise level Under 72dB(A) (at 0.5m away from needle point)
Environmental condition
Temperature 0 ~ 40° C
Moisture 45 ~ 85 %
Dimension
(Width x Height x Depth)
642 mm x 734 mm x 745 mm, 25.3" x 29" x 29.3"
Weight 42 kg
Embroidery area (Y x X)
Tubular frame (Sew fi eld of PTA-32320) 285 mm x 290 mm, 11.2" x 11.4" Max.*1
Normal cap frame (Option) 67 mm x 180 mm, 2.6" x 7" Max.*2
Wide cap frame (Option) 95 mm x 290 mm, 3.7" x 11.4" Max.*2)
Memory capacity About 100,000,000 stitches
Registered pattern 3,000 pat.
B
A
When oiling the Head shaft, please move the head to the left by
pressing (Pointer). 3-5
Too much oil may stain fabrics and threads.
Mark Place to oil Specified oil
A
(Lubricate with oil slightly with a small brush and
sewing machine oil between the outer and inner
rotary hook parts.)
Sewing
B Head shaft
Rotary hook
machine oil