HappyJapan HCS3 Instruction Book Download

Page: 260 / 364

-RA -95

1. When the machine is stopped, press

and Press

“OTHER”.

2. Press

Press

to execute.

The machine will display a warning, then start

turning the main shaft automatically.

The speed will slowly increase from slowest

speed to maximum and then stop automatically

and return to Drive mode.

If you cancel, press the

The display returns to MENU.

25-2

INITIALIZING OF MACHINE SETTINGS

25_2 Q101

Initializing of machine speed

If you have E-18, E-30, E-51 or E-52 while sewing, Please try initializing the machine settings.

Speed setting OK?

CAUTION! <Main shaft turns>

Cancel OK

CAUTION! <Main shaft turns>

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands