HappyJapan HCS3, Instruction Book

Page: 56 / 364

-3A -46
5-F
NEEDLE BAR SELECTION
5_F N701
Color change stop mark
Frame out mark
Color change stop function
When a color change stop is set to a color change number, the machine will stop after it
finishes sewing the marked needle number, then following message will be shown:
When you wish to start again, Press (Start/Stop button).
1. Select a color change number and press .
The mark is displayed on the color change number.
2. Set it to the same on other color change number if necessary.
Selection of color change number
Set Color change number to execute frameout set at “PATTERN SETTINGS”.
A frame out command can be added to a design. By setting frameout to a *Color change
number in a design, you can move the frame to a desired position automatically and stop it
after the machine finishes sewing of that color change number.
When you resume operation, the frame has an automatic return to previous position and you
can continue sewing. 14-D
1. Select a color change number and press .
The mark is displayed on the color change number.
2. Set it to the same on other color change number if necessary.
When you turn frameout “On” without setting the movement distance of frameout at “PATTERN
SETTINGS”, the frame will move automatically to the position which was set already with “20
Frameout position” at “MACHINE SETTINGS”. 5-1b.
No thread cut after color change
When “no thread cut after color change” is set on a color change number, thread cut is not
done after color
change at the specified color change number and the machine switches to the next color
change number.
“No thread cut after color change” function can be set by combining color change stop or
frame out function.
No thread cut mark