manualshive.com logo in svg

HappyJapan HCS3, Instruction Book

Share
Download
HappyJapan HCS3 Instruction Book Download Page 10

-S3    -8

Assemble machine unit

1.  Put the thread stand on to the machine and insert the 

thread guide pillar.

 

(set nut knob nut into the thread guide pillar and 2 

washers)

 

Turn the thread guide pillar clockwise with a 3 mm hex

-

agonal driver until tight.

 

Turn the knob nut clockwise with a 3 mm hexagonal 

driver until tight.

2.  Insert the thread stand pin with wave 

washer on the thread stand by turning 

clockwise, Then insert thread stand felt.

3.  Install the fasten collars to the thread 

guide pillar.

4.  Install the thread guide bracket with 

supplied screws  (M6 x 10  2 pcs).

 

5.  Lift the fasten collar up and fix with 2.5 

mm hexagonal driver.

2_4   U701

2-4

SETTING UP THE MACHINE

1

3

4

5

2

1

4

4

3

Summary of Contents for HCS3













































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands