HappyJapan HCS3 Instruction Book Download

Page: 251 / 364

-S3 -111

4. Press

In maintenance mode, pressing this button

causes the moving knife to open and stop at max

open position.

5. Remove any waste thread and dust from the

knife assembly and surrounding area.

6. Press

Moving knife returns to the original position.

23-3

MAINTENANCE

23_3 U701

CAUTION: To prevent accidents.

The thread cutting knife moves quickly.

Keep your hands away from the machine.

Press

to return to Menu mode.

7. Tight set screws (2 pieces) for ﬁ x the needle

plate.

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands