HappyJapan HCS3 Page 212 Instruction Book Download

Page: 212 / 364

-SA -95

1. When the machine is stopped, press

2. Select “REPORT”.

3. Select

The screen is switched to date or number.

4. In order to exit the mode, proceed to the

step 5.

If you want to delete the record, press

5. Press

The display returns to MENU.

19-1e

REPORT

22_4e O90

The date and time of error message

You can view code and time of the error message and last 100 times of the data will be held.

The number of error message

You can view the total number of each error messages which is occurred in the embroidery ma-

chine.

Press to return to Drive mode.

Save the report

You can save the displayed records in CSV format.

Insert the USB flash drive into the machine, Insert the USB flash drive into the machine and

press key then, new folder named “Production Report” will be made and the following files

will be saved.

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands