HappyJapan HCS3, Instruction Book

Page: 25 / 364

-SJ -26 3_9c NB01
Quick move
First press this key and then the arrow key to
move the frame toward the edge of the max-
imum embroidery area in the direction of the
arrow.
Quick embroidery design data position move
First press this key and then the arrow key to
move the frame where the design data can be
embroidered at the edge in the direction of the
arrow.
Frame move key
The frame moves toward direction of the arrow
3-7
DRIVE MODE
Pointer (Option)
Turn on and off the laser pointer.
Position alignment by defining 2 points 9-8
machine automatically sets angle and embroidery
only by defining 2 points.
X Direction frame move
YDirection frame move
The frame can be moved with specified distance
along X axis or Y axis. (Unit: mm)
The function allows you to move the frame pre-
cisely with a pitch of 0.1mm.
Select the number, and press .
The frame will move specified distance.
Changing is cancelled.
Numbers are deleted.
Pressure foot
You can raise or lower the presser foot .
Fast move (OFF state)
Press the button to turn “ON” state.
Fast move (ON state)
Press this key one time to move the frame faster
toward the direction of the arrow.
Press the button to turn “OFF” state.
Fast move speed setting (High)
Fast move speed setting (Middle)
Fast move speed setting (Low)
The speed of “Fast move” can be adjusted.
You can move the
embroidery frame
by pressing desired
position on the
screen.