HappyJapan HCS3 Page 215 Instruction Book Download

Page: 215 / 364

-DE -163

1. When an image is changed, insert the USB

flash drive into the machine.

2. When the machine is stopped, press

2. Select

“SCREEN”.

4. Select the image to be unwanted or deleted

saved on the screen.

3. Press

Image is deleted.
Setting is cancelled.

4. Select Image file.

Press the image file name you would like to add

on the screen.

Ex: The new image is added in the 006.

5. Press

The setting is fixed and display returns to MENU.

21-2

SCREEN SAVER

22_9 UA0

Change and delete image(s)

This is done to change or delete screen saver image(s) 5 images are pre-installed in 001 thru

005.

Maximum 12 images can be saved by adding images.

Press to return to Drive mode.

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands