HappyJapan HCS3 Instruction Book Download

Page: 50 / 364

-S3 -26

5-8

PREPARATION OF PATTERN DATA

5_7c U701

5-8

Search

Search pattern data or folders stored in the selected USB memory (or PC) by name.

1. Press

In this keyboard for searching, all design names

are checked beforehand and only

candidate alphabets will be highlighted along

respective digits.

2. Enter the whole or a part of the name.

To search a folder, press .

and then

enter.

Switches between pattern search

and folda search.

All the letters and/or numbers are

deleted.

The letter is deleted before the cursor

position.

Cancelled.

The search will start.

3. Press

Displayed a selection screen for the searched

pattern or folder is displayed.

When multiple searches are performed, the ﬁ rst

selection screen searched from the top of the

selection screen is displayed.

Search for pattern

Search folder

Cursor

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands