HappyJapan HCS3 Page 75 Instruction Book Download

Page: 75 / 364

-S3 -50

7-E

CAP FRAME (OPTION)

7_2 U801

Changing the needle plate

You need to use the needle plate

for

cap

frame when you embroider a cap.

When the cap frame is not used, it must be re-

turned to the for ﬂ at sewing needle plate, and

the height of the pressure foot must be adjust-

ed to match the for ﬂ at sewing needle plate.

1. Remove the set screw (2 pieces) by offset

driver and remove the for ﬂ at sewing

needle plate.

2. Put the needle plate for cap on the bed

and tighten with the set screw.

3. When the machine is stopped, press

4. Press

”OTHER”.

5. Press

6. Press

to cancel “Jump”.

Needle plate for cap frame

Needle plate

for ﬂ at sewing

Needle plate

for ﬂ at sewing

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands