HappyJapan HCS3 Instruction Book Download

Page: 26 / 364

-SA -23

3_9d R801

DRIVE MODE

Speed setting by needle (ON state)

Embroidery speed can be set by needle.

If speed by needle exceeds the speed set at Drive speed setting, the value of speed turns gray

and speed by the needle is applied to the speed set at Drive speed setting.

You can be set up taking the following steps.

1. Press

2. Press

3. Change the setting on the needle number

you would like to change with

Press

when returning the setting on all the

needle numbers to maximum.

4. Press

The screen returns to Drive mode.

Speed setting by needle

Drive speed setting

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands