HappyJapan HCS3, Instruction Book

Page: 23 / 364

-S3 -23
3_5 U701
3-5
DRIVE MODE
Needle change
Change
Change the needle bar directly to the indicated
needle number on the button.
Change
Move the sewing head to the adjacent needle in
the direction of the arrows.
Although the needl bar setting has been done,
needle bar setting is changed and pressed
, following dialogue will be displayed.
Needle bar setting will be changed and
the display will return to Drive mode.
Needle bar setting will not be changed
and the display will return to Drive mode.
Pointer
Turn on and off the laser pointer.
Laser pointer is located at right side of needle
no.1.(Needle no.0 position).
When laser pointer is turned on, moving head
moves to needle no.0 position and radiates.
Pointer (Auto)
By pressing the long time, "Auto"
will appear.
Laser pointer turned on automatically, after
the color change stop function or embroidery
finished.
To release this function, press the key long time.
Pressure foot
You can raise or lower the presser foot .
Jump (Off)
The machine can embroider.
Jump (On)
Machine becomes jump and the machine doesn’t
embroider.