HappyJapan HCS3 Page 228 Instruction Book Download

Page: 228 / 364

-3A -77

List

Open the embroidery sequence list to access the patterns.

Also some editing functions are available such as delete, sort and copy.

TASK RESERVATION

22_2g R821

22-2

Task reservation menu

1. Press

“TASK RESERVATION”.

2. P

ress

"LIST".

You can see embroidery list.

3. Edit the reservations when it is needed

Display the selected pattern on the

screen.

Delete the selected pattern reservation.

By doing long press of the icon, all

reservations will be deleted.

Move the selected reservation to desired

position

icons will be displayed between

the reservations.
Press

icon at desired position.

Make a copy of the selected pattern and

insert it at next position of the original.

This function can be used to make same

embroidery once more

Press

Machine return to

Task reservation menu

Selected pattern

Selected or embroidering

Preview of reserved pattern

Estimated embroidery time

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands