HappyJapan HCS3 Instruction Book Download

Page: 157 / 364

-D2 -87

-7

PATTERN SETTINGS

12_7 NB01

Auto origin

When a pattern has different start and end points, the frame returns to the start point.

Setting example

1. When the machine is stopped, press

2. Select "SETTING" and select

(Offset).

3. Press

(Auto origin) and select (ON)

or (OFF).

The setting is fixed.

●

: Start point of pattern

■

: End point of pattern

Offset

The pattern data may be shown.

Setting is returned to the default.

To return to Menu mode.

to return to Drive mode.

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands