HappyJapan HCS3 Instruction Book Download

Page: 22 / 364

-S3 -30

3_9 U901

DRIVE MODE

Drive key

The each key menu will be shown.

Frame forward

This creates direct designations to the position and

data to the designated sewing position.

Piece

If “Repeat” is set, this allows the frame to move to

the beginning of any piece at will.

Change (Color position )

This moves the frame to the beginning of any Color

change number at will beginning of color.

Stitch (Number of stitches )

This moves the frame to any stitch at will.

Frame forward

Needle bar

selection

Drive speed

Needle change

Frame move

i-Custom

(default display)

Pressure foot

Drive speed

Control embroidery speed.

The speed can be controlled while embroidering.

Speed control

Press the + button to increase the machine sewing

speed and the - button to lower the machine speed.

is displayed on the LCD display.

Low speed operation (OFF state)

Press the button to turn “ON” state.

Low speed operation (ON state)

The drive speed will be reduced to “200 rpm”.

Press the button to turn “OFF” state.

Speed setting by needle (OFF state)

Press the button to turn “ON” state. 3-9d

Speed setting by needle (ON state)

Press the button to turn “OFF” stat

e. 3-9d

Needle bar selection 5-E

For each color change in a given pattern, the needle number loaded with the correct color thread is as-

signed by the operator.

Color position forward

Move the frame to the beginning embroidery posi-

tion of the previous or later color position number

Stitch number forward

Move the frame forward or backward by the stitch

number displayed in each button.

Menu

Display menu

mode. 3-A

Powe off

Turn off the machine.

5-1c

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands