HappyJapan HCS3 Instruction Book Download

Page: 122 / 364

-S3 -57

Press to return to Menu mode.

Press to return to Drive mode.

PATTERNS IN MEMORY

11_C U701

11-E

5. Enter the whole or a part of the pattern

name.

The maximum number of characters in a design

name is eight letters or numbers.

All the letters and/or numbers are

deleted.

The letter is deleted before the cursor

position.

Cancelled.

The search will start.

6. Press

In this example, “CA” is entered as ﬁ rst 2 charac-

ters of the design name.

Then, all design name which start from “CA” is

displayed.

7. Press displayed pattern icon to conﬁ rm your

selection.

Number of searched pattern data

Selected pattern data

Summary of Contents for HCS3













































































































































































































































































































































































Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands

HappyJapan HCS3, Instruction Book

Search results

Summary of Contents for HCS3

Reviews:

Related manuals for HCS3

Brands by name

Popular brands