HappyJapan HCD3E, Instruction Book

Page: 98 / 362

-DE -112
9-Cc
POSITION / BOBBIN CHANGE ALERT
16_2 U801
1. Press .
During embroidery, the red progress bar which
shows the remaining amount of bobbin thread will
be extended until the preset stitches.
When the auto stop function is activated.
The machine stops automatically.
When the machine is stopped by manually.
2. Press
when the bobbin is not required
to exchange.
The setting value will not be reset and the stitch
will be counted continuously.
Press when the bobbin is
required to exchange.
The setting value will be reset to “zero” and the
progress bar becomes blue.
Remaining amount of bobbin thread
Setting correction
Correct the setting value to display the alarm message at proper timing.
Condition setting
In order for the machine to calculate the number of stitches that can be embroidered with
one bobbin, set various conditions such as the size of the bobbin used and the diameter of
the bobbin thread being wound.
After setting the required items, press
.
Diameter of wound bobbin thread
Core diameter of bobbin
Internal width of bobbin
Length of bobbin thread wound
As a margin, advance the timing to display
the alert by the length of the set bobbin
thread.
When satin sewing is performed, the ratio of
the width of the bobbin thread to the swing
width when viewed from the back side.
Standard values are preset
for each item.