HappyJapan HCD3E Page 100 Instruction Book Download

Page: 100 / 362

-DA -110

9-Ce

POSITION / WORK SAVE

16_2 S201

Work save

You can save the state (before, during) of working design (the design displayed on the drive

mode) and the selected frame type for the working design.

This allows you to resume work by

suspend sewing

and returning to the state before the

suspend

of the driving design even after working other designs.

1. Press

”Frame forward”.

2. Press

“Save”.

3. Press

The

state of working desig

n and

selected

frame type have been saved.

"Save” turn to

"Read”.

Saving is cancelled.

4. Press

to return to Drive mode.

Time to save

Selected frame

Number of stitches

sewn up to now

Stitches of pattern

Save

Save the state of working design and selected frame type.

Working

design to save

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands