HappyJapan HCD3E, Instruction Book

Page: 173 / 362

-DA -31
15-1b
MACHINE SETTINGS
5_1 R701
No. Display Settings
(std : Underlined or Blue)
Contents
15 Convert cap When using cap frame, the vertical direction of the embroidery design
should be turned 180 degrees because cap is set on the drive frame
upside down.
With this function, the vertical direction of the embroidery design will
be turned 180 degrees automatically when cap frame is selected on the
menu.
16 Revers ramemove
Frame will be moved in the opposite direction of the arrow key.
17 STR.Auto Position When machine is stopped in the middle of design and frame
is moved for treating thread, the frame should be returned to
last stopped point with Position key.
With this function, you just need to press Start button, then the
frame will be returned to the last stopped point automatically
and start embroidery without pressing Position key.
❍
:
Moved point
●
:
Last stopped point
18 Embroidery
weight
This setting for heavy duty material depends by material
weight.
Normally, please select "middle" or "Heavy" for Border frame.
Machine speed is decreased automatically, when you sellect
"middle "or "heavy".
19 Expand cap limit
1 ~ 10mm
0 .........
The direction of Y-axis of the embroidery area (standard) is extended
in the direction of the brim of the cap.
If the embroidery area is extended too much, there is a
possibility that a needle and pressure foot may hit a frame and may
be damaged.
Before start sewing, please check carefully the embroidery area by
trace function etc..
• The embroidery area is extended with the set-up size.
• The embroidery area is not extended.
Extended embroidery area
Embroidery area
20 Frameout position
0 ~ 100 ~ 330mm
Set movement of frameout in the Framemove. 3-6
❍
: Frameout position
●
: Stop position
Movement
21 Display inch N0 : Display the unit of dimensions by millimeters meter.
YES : Display the unit of dimensions at an inch.
22 Trace speed
0 ~ 100 ~ 300
You can change the Tracing speed. "100" mean the normal speed.
If you change the number bigger, the speed decrease.
23 Display off timer
1 ~ 240 (min.)
The machine turns off the display screen when the time without any
operation exceeds the time entered in the parameter.
Timer function is "off" when setting value is set to "0"