HappyJapan HCD3E Page 276 Instruction Book Download

Page: 276 / 362

-FC -5

3-1

ONE POINT FRAME SETTINGS

One Point Frame has 2 different size (S size and L size).

When you use One Point Frame, please make machine setting according to frame size selected.

CAUTION: To avoid problems.

The machine and / or One point frame may be damaged if the incorrect frame settings are used.

3_1 M501

OFF

Selected frame

HCH, HCS2

1. Turn on the power switch.

Indicates the selected frame.

2. In case required One-point frame is already selected,

press the

abd jump to operation no.4.

In case selected frame type is not same as your re-

quirement, press

3. Select

“Cap and One-point frame”.

Change the type of frame.

OnePoint S

: One-point frame (small)

OnePoint L : One-point frame (large)

4. Select desired size of frame and press

The embroidery area and outline of the pattern

itself appear in red. All are displayed on the left

together.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands