HappyJapan HCD3E Page 65 Instruction Book Download

Page: 65 / 362

-DE -56

7-2

CAP FRAME

Installing and removing the cap drive frame

The cap drive frame must be installed onto the carriage to embroider a cap.

Please remove by reverse order of these step.

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

3. Press

and Press

The embroidery frame will move to the center .

1. Turn on the power switch.

Push the power switch firmly so it will remain on.

Confirm that there are “Cap (Std.)” or “Cap

(Wide)” in the display.

If these icons are not in the display, please return

to “How to turn on the machine” on previous page

and change the cap frame.

2. Press

The carriage and frame will move slightly and

then the embroidery frame will return to the

previous position automatically.

OFF

CAUTION: To prevent accidents.

The frame moves quickly.

Keep hands away from the frame.

OFF

4. Press

and press and hold

The power switch is automatically turned “OFF” and

the machine is turned off.

7-2 UC01

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands