HappyJapan HCD3E Page 133 Instruction Book Download

Page: 133 / 362

-RA -68

1. When the machine is stopped, press

2. Select “NEEDLE”.

3. Press

from right submenu.

4. Press

The color change data will be saved into memo-

ry.

12-6

NEEDLE BAR SELECTION

13_5 B701

Color change data registration

You can import and apply color change data from saved patterns (Including color change stops)

to the current pattern. This function lets you apply the same color change data from other

patterns.

The color change data is limited to one and the color change numbers are limited to 250.

Color change number

Press to return to Menu mode.

Press to return to Drive mode.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands