HappyJapan HCD3E Page 213 Instruction Book Download

Page: 213 / 362

-DA -150

1. When the machine is stopped, press

2. Select

“SCREEN”.

3. Press

4. Select the number. (Unit : minute)

Changing is cancelled.
Numbers are deleted.

5. Press

6. Press

The setting is fixed and display returns to MENU.

21-1

SCREEN SAVER

22_6 O901

If screen saver is set, images saved in the machine are displayed on the screen in numerical

order when the machine is stopped and is not in operation for a certain amount of time.

Screen saver is cancelled when any place on the touch screen is touched.

If the setting time of “display off timer” on “OPTION” is shorter than one of screen saver,

screen saver is not displayed.

Make sure the setting time of “display off timer” is longer than one of screen saver when both

screen saver and “display off timer” are used.

15-2

Start-up time

Set the time to start screen saver

Press to return to Drive mode.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands