HappyJapan HCD3E, Instruction Book

Page: 69 / 362

-D3 -57
7-5
CAP FRAME (OPTION)
4_5 RC01
Adjustment
When you hoop a cap on the cap frame, please
adjust in the following manner:
1. Adjust up and down position of the hook
according to the thickness of the cap to
adjust clamp tension. At this moment, the
hook should open and close without feeling
too tight.
(For adjustment, proceed to procedure 5
below).
Use the wing nuts for adjustment. (Fig. 1)
If the hook is extremely tight, it will damage the
cap frame permanently.
2. Adjust the guide position to suit the height of
the cap.
Remove screws at left and right to adjust. (Fig.
2)
Wing nut
Hook Fig. 1
N ormal cap frame
Cap drive
Guide
Screw
Fig. 2
High Low