HappyJapan HCD3E Page 39 Instruction Book Download

Page: 39 / 362

-SA -17

HOW TO READ THESE INSTRUCTIONS and SCROLLBAR

4-8

3_3 O901

How to read these instruction

The instructions in this manual have been formatted as follows:

Written instructions will be provided on the left side of the page while graphics depicting the nec-

essary steps are provided on the right.

Graphics on the far right will show the display after performing the steps indicated.

This indicates an additional

explanation on an operation

elsewhere in the manual for

more detail.

AWords marked with a “*” are explained in

“EMBROIDERY TERMS” at the end of this

CAUTION: To prevent accidents.

This will appear for items related to your safety.

CAUTION: To avoid problems.

This will appear for items related to potential problems.

Order of operation

Indicates supplementary ex-

planation regarding a given

operation or action.

1. When the machine is stopped, press

2. Select “PATTERN”.

The display indicates the current pattern.

The right side of display shows the number,

name and details for the current pattern.

Number of stitches

Number of Color change number

Height

Width

3. Select *pattern data.

This pattern will be selected. 3-3

Selected pattern data

Operation key

Press to return to Menu mode.

Press to return to Drive mode.

Scrollbar

Display area

Scroll area

Arrow key

Scrollbar

If the data are too much to fit into display screen, you can use scrollbar.

Display area : It shows the area which is displayed.

Arrow key

: You can scroll the display area to arrow marked direction.

Scroll area

: It shows the whole area of the data.

You can push arbitrary point of Scroll area to display the desired location.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands