HappyJapan HCD3E Page 200 Instruction Book Download

Page: 200 / 362

-FR -48

18-3

OTHER SETTINGS

Version information and software update

Software version installed in the machine is displayed.

Software can be updated to the latest version.

1. When the machine is stopped, press

2. Select “OTHER”.

3. Press

4. Confirm version number.

Press

to return to MENU screen.

The display returns to MENU.

When updating, insert USB flash drive

including update file into the controller and

press

22_3 P80

Preparation for update file

Contact your distributor to obtain the latest update file.

Use the appropriate update file for your machine.

Put update file in the root directory of USB flash drive.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands