HappyJapan HCD3E Page 64 Instruction Book Download

Page: 64 / 362

-DA -48

7-1

CAP FRAME option

Cap frame settings

2 types of cap frames, Normal and Wide, are available with this model. When you embroider by

using a cap frame, please ensure that a correct setting is selected according to each.

CAUTION: To avoid problems.

The machine and/or cap frame may be dam-

aged if the incorrect frame settings are used.

1. When the machine is stopped, press

2. Press

3. Select

“Cap and One-point frame”.

4. Select desired type of frame.

Then Cap frame will be set.

5. Press

and

The embroidery frame will move to the center .

7-1 O901

CAUTION: To prevent accidents.

The embroidery frame and carriage will move.

Please keep hands clear for your safety.

Press

to return to Drive mode.

Summary of Contents for HCD3E











































































































































































































































































































































































Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands

HappyJapan HCD3E, Instruction Book

Search results

Summary of Contents for HCD3E

Reviews:

Related manuals for HCD3E

Brands by name

Popular brands