live Streaming Setting
You can set the video profile transmitted to the network.
In the "
device
>
camera
>
live setup
" menu, if you set live replacement to <
manual
>, then the live streaming
profile is used as the output of the extended monitor.
menu > network > live Streaming
•
Profile : Select a network profile for the connected camera.
•
Codec : Show the codec information for the selected network profile.
•
Resolution : Display the resolution for the selected network profile.
•
Frame Rate : Shows the selected network profile's frame rates.
M
`
If the profiles used for network and recording are different, camera's video feed may not comply with the frame rate as
specified in the camera.
You can send an e-mail to a NVR-registered user at a specific time interval, or if an event occurs.
Smtp Setting
Sets the SMTP mail server.
menu > network > e-mail > Stmp
•
Server Address : Enter the SMTP server address to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
ID : Enter a ID to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <
never
> and <
tlS (if available)
>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.
`
See "
Using virtual keyboard
" in the Appendix.
•
E-mail Test : Conducts the test on the server settings.
English
_47
●
menu
Setup
