Setting the network camera's recording profile
You can configure the video profile settings for instructing the network camera (connected to each channel) to
make recording.
menu > record > record Setup > camera
M
`
You can configure the settings only for the profiles that are supported by the camera.
`
If the profiles used for recording and network are different, camera's video feed may not comply with the frame rate as
specified in the camera.
•
CH : Click <
> to display the channel information table.
•
Profile : You can select the recording profile for selected channel.
•
Codec : You can check the codec for selected channel.
•
Resolution : You can select the resolution for selected channel.
•
Frame Rate : You can set the frame rate for selected recording profile.
record option
When the HDD capacity is full, you can set whether to stop recording or start overwriting.
menu > record > record option
•
Disk End Mode : Select a HDD repetitive recording type.
- Overwrite : If the HDD is full, this will overwrite the existing data and keep recording.
- Stop : If the HDD is full, this will stop recording automatically.
•
Disk End Beep : If you select <
Stop
> for the disk end mode, this button will be active. Specify the use of
beep when the HDD recording ends.
If you check it, the beep will sound on the disk full and the recording stops.
•
Auto Delete : If you check this option, the period list box is active. Specify the deletion period to delete any
earlier data than the specified date. However, you can search for data from the current time to the selected
date.
`
If you select <
Overwrite
> as a method to end recording, the button is enabled.
`
You can select a channel and set a different recording duration for each channel.
•
Apply to CH : If you select <
apply to cH
>, a confirmation dialog window is opened.
Select a channel to apply the applicable settings then press <
ok
>. The settings will be applied to the
selected channel.
J
`
If you press <
OK
> when you have completed your settings, all the existing data earlier than the specified period will be
deleted automatically. So it is recommend to backup the previous data if necessary for later use.
38_
menu setup
menu setup
