video loss detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
menu > event > video loss detection
•
Apply to CH : If you select <
apply to cH
>, the "
apply to cH
" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <
ok
> to apply them to the selected
channels.
•
CH : Click <
> to display the channel information table.
•
Video Loss State : Specify the use of video loss detection.
•
Alarm Out : Select an alarm output method.
`
For alarm output, see the "
HDD Alarm Setting
" in "
Menu Setup
>
Setting the Device
" in the Table of Contents.
•
Alarm Duration : Specify the duration of the alarm output with the beep.
alarm out Schedule
You can set the conditions and operating hours for scheduled alarms.
menu > event > alarm out Schedule
•
Alarm Out : Sets the alarm output method.
`
For alarm output, see the "
HDD Alarm Setting
" in "
Menu Setup
>
Setting the Device
" in the Table of Contents.
- <
on
> : Marked in green, and always generates alarm on scheduled time.
- <
off
> : Marked in black, no alarm is generated even if an event occurs.
- <
event Sync
> : Marked in orange, generates alarm only when an event occurs.
•
Apply to All Alarm out : Applies the configured schedule to all alarms.
M
`
When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.
English
_41
●
menu
Setup
