ddnS
If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected.
menu > network > ddnS
•
DDNS Site : Specify the use of DDNS and select a site that you registered.
•
Server Name : Enter the server name registered with the DDNS site.
•
Product ID : Enter the DDNS site user name.
•
Host Name : Enter the hostname registered with the DDNS site.
•
User Name : Enter the user name registered with the DDNS site.
•
Password : Enter the user password registered with the DDNS site.
M
`
See "
Using virtual keyboard
" in the Appendix.
`
If you select <
OFF
>, the input box will be inactive.
`
If you select <
ddns.hanwha-security.com
>, the host name input box will be inactive.
•
Quick Connect : Appears if the <
ddns.hanwha-security.com
> is selected for a <
ddnS Site
>.
To use the function, set to <
use
> after connecting the NVR to a UPnP router.
M
`
If canceled during Quick Connect configuration, it automatically switches to <
Not Use
> and saved.
`
If you are setting up a port that is already in use, then the connection might fail. Check the port setup of your router.
`
Server name, product ID, and quick connect can be displayed if you set <
DDNS Site
> to <
ddns.hanwha-security.com
>.
`
DDNS is a short form of Dynamic Domain Naming System.
DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.
com) to an IP address consisting of numbers (64.233.189.104).
DDNS (Dynamic DNS) is a service that registers a domain name and the floating IP address with the DDNS server so that the
domain name can be routed to the IP address even if the IP is changed in a dynamic IP system.
port Setting
menu > network > interface > port
•
Protocol Type : Select the protocol type among TCP, UDP - Unicast and UDP - Multicast.
•
Device Port : Enter the connectable port number. Initially, <
554
> is set.
- TCP : It has better stability and lower speed when compared to UDP, and recommended for internet
environments.
•
UDP Port : Initially, <
8000~8159
> is set. It increases / decreases by 160.
- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area
network (LAN) environments.
•
Multicast IP Address : User can directly input.
•
Multicast TTL : Select from 0 ~ 255. Initial value for the TTL is set to <
5
>.
•
HTTP Port : Enter the port number for the Web Viewer. Initially, it is set to <
80
>.
•
HTTPS Port : In this version, the security of HTTP (web communication protocol) is enhanced. The initial port
is <
443
>.
•
Cam Proxy Port : Sets the camera proxy port. The default is <
10001
>.
•
Send SSL : Select this option to send SSL.
•
Backup Bandwidth : Select the degree of backup bandwidth.
44_
menu setup
menu setup
