manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 83 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 83

5-25

TITRA

TION METHODS

Final Result Units:
  ppt (g/L) 

  parts per thousand (grams/liter) 

  ppm (mg/L) 

  parts per million (milligrams/liter)

  ppb (µg/L) 

  parts per billion (micrograms/liter)

  M (mol/L) 

  Molarity (moles/liter) 

  N (eq/L) 

  Normality (equivalents/liter)

  mg/L 

 milligrams/liter

  µg/L 

 micrograms/liter

  mmol/L 

 millimoles/liter

  mg/mL 

 milligrams/milliliter

  mg/100 mL 

  milligrams/100 milliliters

  g/100 mL 

  grams/100 milliliters 

  eq/L 

 equivalents/liter

  meq/L 

 milliequivalents/liter

A formula example is shown below using N (eq/L) as the titrant units and g/L as the final result units:

Variables can be set according to the amount of sample and titrant used.

5.5.13.1.6.    STANDARDIZE TITRANT BY WEIGHT

This calculation is used when the concentration of the titrant is determined using a solid standard. Determination of the titrant 
concentration is based on the primary standard weight (in grams).
The calculation is based on the selected titrant unit. If the titrant unit is M (mol/L), the formula used to calculate the result is 
displayed below: 

Summary of Contents for HI931



























































































































































































































Reviews:

No comments