manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 49 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 49

4-5

GENERAL OPTIONS

The option keys allow the following operations:
 

 Deletes the highlighted file from the USB storage device.

 

 Deletes all currently displayed files from the USB storage device.

 

 Copies the highlighted file from the USB storage device to the titrator.

 

 Copies all currently displayed files from the USB storage device to the titrator.

 

 Returns to the 

General Options 

screen. 

Note

:  In order to restore files from a USB key, please ensure that the methods and/or reports  you wish to transfer to the titrator 

are in the correct folder:

  - Methods:  

USB Drive:\HI931\Methods\*.mtd

  - Reports:  

USB Drive:\HI931\Reports\*.rpt

4.3.    ADMINISTRATION

A 4-digit numeric PIN can be set to prevent unauthorized changes from being made.
When the user enters administration and a pin has not been set, the user will be prompted to enter a new PIN.

Once a PIN has been set, the titrator can be locked. When a titrator is locked, the users cannot modify methods or delete reports. 
Basic functions are still available (review reports, save to USB, etc.).

Summary of Contents for HI931



























































































































































































































Reviews:

No comments