Hanna Instruments HI931 User Manual Download

Page: 127 / 218

9-7

ISE MODE

9.2.7. SET REMINDER PERIOD

If Daily or Periodic option was selected for the calibration reminder, the reminder period must also be set.
For a daily reminder period the time of day can be set.
For a periodic reminder period the number of days, hours and minutes can be set.

• Press

to move the cursor to the next field.

• Press

to save the changes or

to return to the previous screen.

• Press

to disable the calibration reminder and return to ISE setup menu.

9.2.8. CLEAR CALIBRATION

This option clears the existing ISE calibration. If the calibration is cleared, a new calibration must be done in order to take
measurements.
• Press

to clear the previous calibration or

to return to the previous screen.

Summary of Contents for HI931



























































































































































































































Search results

Summary of Contents for HI931

Reviews:

Related manuals for HI931

Brands by name

Popular brands

Hanna Instruments HI931, User Manual

Search results

Summary of Contents for HI931

Reviews:

Related manuals for HI931

Brands by name

Popular brands