manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 28 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 28

2-4 

SETUP

2.2.    SAFETY MEASURES

The following safety measures must be followed:

1. Never connect or disconnect the pump assembly with the titrator turned on.
2.  Verify that the burette and the attached tubing are assembled correctly (see 

Maintenance

, 

Peripherals

, 

Burette

 

Maintenance

 

for more details).

3. Always check that the titrant bottle and the titration beaker are on a flat surface.
4. Always wipe up spills and splashes immediately.
5. Avoid the following environmental working conditions:

•  Severe vibrations
•  Direct sunlight
•  Atmospheric relative humidity above 95% non-condensing
•  Environment temperatures below 10°C and above 40°C
•  Explosion hazards

6. Have the titrator serviced only by qualified service personnel.

2.3.    INSTALLATION
2.3.1.    TITRATOR FRONT VIEW

Summary of Contents for HI931



























































































































































































































Reviews:

No comments