manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 48 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 48

4-4 

GENERAL OPTIONS

The option keys allow the following operations:
     

     Deletes the highlighted file.

     

     Deletes all currently displayed files.

     

     Copies the highlighted file from titrator to a USB storage device.

     

     Copies all currently displayed files from titrator to a USB storage device.

     

     Returns to the 

General Options 

screen.

The status of the transfer (“Successful”/“Unsuccessful”) and the file name of the currently processed file are displayed during copying or 
deleting.

Note:

 The saved files will be stored on the USB key in the 

HI931

 folder, as follows:

  - Methods:  

USB Drive:\HI931\Methods\*.mtd

  - Reports:  

USB Drive:\HI931\Reports\*.rpt

4.2.    RESTORE FILES FROM USB STORAGE DEVICE

This screen allows the user to transfer files from the USB storage device to the titrator.
  Standard Method Files  - 

HIXXXXYY.MTD

 (e.g.: HI0001EN.MTD, HI1004EN.MTD)

  User Method Files 

- 

USERXXXX.MTD

 (e.g.: USER0001.MTD) 

  Report Files 

- 

Ti_XXXXX.RPT, mV_XXXXX.RPT, pH_XXXXX.RPT, ISEXXXXX.RPT, mVrXXXXX.RPT 

(e.g.: Ti_00001.

   

 RPT, mV_00001.RPT, pH_00001.RPT, ISE00001.RPT, mVr00001.RPT)

Use the 

 and 

 keys to select the file type.

The number of files and the file name will be displayed.

Summary of Contents for HI931



























































































































































































































Reviews:

No comments