manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 118 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 118

8-6 

m

V MODE

8.3.    RELATIVE mV CALIBRATION

• Press 

 to accept the value.

• Press 

 to cancel this operation and return to the previous screen.

• Press 

 to delete the last digit.

8.4.    LOGGING

Data logging is available in mV mode. It can be logging on demand (Manual Logging) or automatically (Interval Logging) at 
predefined time intervals.
To customize the logging report:
• Press   to display the 

Data Parameters 

screen.

•  Highlight the 

Setup pH/mV/ISE

 Report option and press 

 to display the 

Setup pH/mV/ISE Report 

screen.

•   Use  the 

 and 

 keys to highlight the data field that you want to show/hide in the pH/mV/ISE report and then press 

 to activate/deactivate it.

•  Each field marked by “*” is an active field selected for the report.
• Press 

 to save the customized report.

Summary of Contents for HI931



























































































































































































































Reviews:

No comments