manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 14 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 14

10 

QUICK ST

ART GUIDE

Viewing Graph During Titration

After a few doses are dispensed, 

 will become active. Press 

 to display the real-time titration graph. 

The curves displayed are plots of the pH and the 1st derivative versus Titrant Volume (for details, see the Instruction Manual).
The two graphs are scaled to fit in the same screen window. Press 

 to change the y-axis scale to either the pH values or the 

1st derivative values.

     

Titration Termination

The titration is normally terminated when the first equivalence endpoint is detected according to the selected algorithm. To ensure the 
correct detection and interpolation of the equivalence endpoint, the titrator will dispense a few additional doses after the endpoint 
was reached. 
The titration result can be displayed either in the main

 

screen or in the 

Graph of Titration Data

 screen:

     

 

Summary of Contents for HI931



























































































































































































































Reviews:

No comments