manualshive.com logo in svg

Hanna Instruments HI931, User Manual, Page: 32 / 218

Share
Download
Hanna Instruments HI931 User Manual Download Page 32

2-8 

SETUP

2.3.5.3.    CONNECTING THE PUMP

To connect the pump, follow these steps:

•  Retrieve the pump cable from inside the bay. The pump 1 connector is located in the left bay and pump 2 in the right bay.
•   Connect the cable to the pump as shown below. The pump connector is located on the bottom of the pump.
•  Lower the pump into the titrator, then slide it towards the front of the titrator case until it is firmly latched.
•  Secure the pump with the locking screw.

This procedure can be repeated to connect a second pump.

2.3.5.4.    ATTACHING BURETTE BLANK SUPPORT

To attach the burette blank support, follow these steps:

•   Insert burette blank support into the bay. Lower the burette blank support into the titrator, then slide it towards the front of 

the titrator case until it is firmly latched.

•  Secure the burette blank support with the locking screw.

Summary of Contents for HI931



























































































































































































































Reviews:

No comments