Hanna Instruments HI931 User Manual Download

Page: 102 / 218

7-4

pH MODE

7.2. pH SETUP

To access pH Setup, press

option key while in pH mode.

Use

and

keys to highlight the desired option.

Press

to access the selected option.

7.2.1. BUFFER ENTRY TYPE

Option: Automatic, Semiautomatic or Manual

Automatic

: The instrument automatically selects the pH calibration point as the closest buffer from the predefined buffer group (see

Edit

Buffer

Group

section).

Semiautomatic

: The instrument automatically selects the closest buffer from the available buffers (standard and custom buffers).

Manual

: The calibration buffer must be manually selected by the user during calibration from the available buffer list (standard and

custom buffers).

Summary of Contents for HI931



























































































































































































































Search results

Summary of Contents for HI931

Reviews:

Related manuals for HI931

Brands by name

Popular brands

Hanna Instruments HI931, User Manual

Search results

Summary of Contents for HI931

Reviews:

Related manuals for HI931

Brands by name

Popular brands