40
Chapter 2
P/N 130859-US, Manual Revision: AA
Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
Pump Control Pads
Figure 15, Example of the pump control pads
The pump control pads control the motion and speed of the pump. The device
has default pump speeds that vary depending on bowl size, current phase, and
mode and are set to optimize performance. The pump speed parameters can
be adjusted during a procedure using the pump control pads.
To immediately stop the pumps, touch
(
Pause
). To restart the current
phase, touch
(
Play
), or to start a different phase, touch the corresponding
phase pad.
Procedure Diagram
The procedure diagram visually indicates the status and progress of the
procedure. It shows the movement of the pump, the movement of fluid through
the disposable components, if any error states occur during the procedure, and
the procedure statistics.
1.
4.
5.
3.
2.
1. Pause
2. Play
3. Current pump speed
4. Increase speed
5. Decrease speed
