74
Chapter 5
P/N 130859-US, Manual Revision: AA
Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
Preparing the Cell Saver Elite+ Device
Connecting to
Power
Before powering on the device, make sure it is plugged into a properly
grounded power outlet.
A power cord is supplied with the device. Do not replace the power cord with a
substitute. If necessary, contact the Haemonetics Customer Care Center for a
replacement. Always ensure the power cord is connected to an appropriately
grounded power source.
Warning: Ground continuity can only be achieved when the equipment is
connected to a properly grounded outlet.
Note: The Cell Saver
®
Elite
®
+ device is classified as a continuous operation,
Class I, Type CF, IPX1 device, in accordance with IEC/EN 60529 and 60601
standards for medical electrical equipment.
Positioning the
Device
To position the device for a procedure:
1. Extend each IV pole to the desired height.
2. Remove the touch screen display from the rear panel of the device.
3. Mount the touch screen display on the left IV pole and adjust the display
to the optimal viewing angle.
4. Rotate the reservoir weigher on the right IV pole so that it faces the
desired direction.
