Equipment Description
31
Haemonetics
®
Cell Saver
®
Elite
®
+ User Manual
P/N 130859-US, Manual Revision: AA
Rear and Side Panel Components
Figure 4, Rear and side panel components
Waste Bag
Weigher
The waste bag weigher monitors the amount of fluid collected in the waste bag.
When the weigher senses the waste bag is nearly full, the device displays a
message indicating the waste bag must be emptied or replaced.
Air Intake
The air intake allows air to circulate inside the device, keeping the internal
components cool. The air intake contains a removable filter that can be cleaned
or replaced if necessary.
Air Exhaust
Filter
The air exhaust filter is a replaceable antibacterial filter, through which
externally vented exhaust from the SmartSuction
®
system passes.
Touch Screen
Storage Mount
The touch screen storage mount holds the touch screen in place during storage
and transport of the device.
Vacuum
Connection
The vacuum connection allows the user to connect the filtered vacuum line that
leads to the reservoir.
A.
B.
C.
B.
4.
5.
6.
7.
8.
1.
2.
9.
10.
11.
C.
3.
A. Device Components
1. Waste bag weigher
2. Air intake (not shown –
bottom of device)
3. Air exhaust filter
(not shown – bottom of
device)
B. Cables and Connections
4. Touch screen storage
mount
5. Vacuum connection
6. Reservoir weigher
connection
7. Equipotential ground
terminal
8. Touch screen cable entry
C. Power Entry Module
(PEM)
9. Power cord connection
10. ON/OFF switch
11. Main fuse holder
