Command Manual (For Soliton) – HWPing
H3C S3100 Series Ethernet Switches
Chapter 1 HWPing Commands
1-18
Parameters
string
: HTTP operation string used to specify the webpage to be accessed, in the range
1 to 255 characters.
version
: HTTP version, in the range 1 to 255 characters. At present, this argument can
only be HTTP/1.0, where HTTP must be capitalized.
Description
Use the
http-string
command to configure the HTTP operation string and version in an
HTTP test.
Use the
undo
http-string
command to remove the configured HTTP operation string
and version.
By default, HTTP operation string and version are not configured.
Note that the
http-string
command applies to HTTP tests only.
Related commands:
http-operation
.
Examples
# Set the webpage to be accessed by an HTTP test as
/index.htm
and the HTTP
version as
HTTP/1.0
.
<Sysname> system-view
[Sysname] hwping administrator http
[Sysname-hwping-administrator-http] test-type http
[Sysname-hwping-administrator-http] http-string /index.htm HTTP/1.0
1.1.14 hwping
Syntax
hwping
administrator-name
operation-tag
undo
hwping
administrator-name
operation-tag
View
System view
Parameters
administrator-name
: Name of the administrator to create a HWPing test group, a string
of 1 to 32 characters.
operation-tag
: Operation tag, a string of 1 to 32 characters.
Description
Use the
hwping
command to create a HWPing test group and enter HWPing test group
view. If the specified HWPing test group already exists, this command leads you to
