Command Manual ( For Soliton ) – SSH
H3C S3100 Series Ethernet Switches
Chapter 1 SSH Commands
1-7
status
: Displays SSH status information.
Description
Use the
display
ssh server
command on an SSH server to display SSH status or
session information.
Related commands:
ssh
server
authentication-retries
,
ssh server timeout
,
ssh
server compatible-ssh1x enable
,
ssh server rekey-interval
.
Examples
# Display SSH server status information
<H3C> display ssh server status
SSH version : 1.99
SSH connection timeout : 60 seconds
SSH server key generating interval : 0 hours
SSH Authentication retries : 3 times
SFTP Server: Disable
SFTP idle timeout : 10 minutes
Caution:
z
If you use the
ssh server compatible-ssh1x enable
command to configure the
server to be compatible with SSH1.x clients, the SSH version will be displayed as
1.99.
z
If you use the
undo ssh server compatible-ssh1x
command to configure the
server to be not compatible with SSH1.x clients, the SSH version will be displayed
as 2.0.
# Display session information about the SSH Server.
<Sysname> display ssh server session
Conn Ver Encry State Retry SerType Username
VTY 0 2.0 AES started 0 stelnet kk
VTY 1 2.0 AES started 0 sFTP abc
Table 1-1
Description on the fields of the
display ssh server session
command
Field
Description
Conn
Number of VTY interface used for user login
Ver SSH
version
Encry
Encryption algorithm used by SSH