Command Manual (For Soliton) – MAC Address Authentication
H3C S3100 Series Ethernet Switches
Chapter 1 MAC Address Authentication
Configuration Commands
1-5
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] mac-authentication
1.1.3 mac-authentication interface
Syntax
mac-authentication interface
interface-list
undo mac-authentication interface
interface-list
View
System view
Parameters
interface-list
: List of Ethernet ports. You can specify multiple Ethernet ports by providing
this argument in the form of
interface-list =
{
interface-type interface-number
[
to
interface-type interface-number
] } &<1-10>, where &<1-10> means that you can
provide up to 10 port indexes/port index ranges for this argument.
Description
Use the
mac-authentication interface
command to enable the MAC address
authentication for on the specified port(s).
Use the
undo mac-authentication interface
command to disable the MAC address
authentication for the specified port(s).
By default, MAC address authentication is disabled on a port.
Note:
z
This command is essential for MAC address authentication to work on a port or on
particular ports after MAC address authentication is globally enabled.
z
You cannot configure the maximum number of dynamic MAC address entries for a
port (through the
mac-address max-mac-count
command) with MAC address
authentication enabled. Likewise, you cannot enable the MAC address
authentication feature on a port with a limit of dynamic MAC addresses configured.
z
If you have enabled MAC address authentication on a port, you cannot add the port
to an aggregation group. If a port is already added to an aggregation group, you
cannot enable MAC address authentication on the port.
Examples
# Enable MAC address authentication for Ethernet1/0/1 port.
