Command Manual (For Soliton) – Information Center
H3C S3100 Series Ethernet Switches
Chapter 1 Information Center Configuration
Commands
1-16
Examples
# Set the output channel for the log information of VLAN module to
snmpagent
and to
output information with severity being
emergencies
. Log information of other modules
cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent log state off
[Sysname] info-center source vlan channel snmpagent log level emergencies
state on
# Set the output channel for the log information of VLAN module to
snmpagent
and to
output information with severity being
emergencies
. Log information of other modules
and all the other system information cannot be output to this channel.
<Sysname> system-view
[Sysname] info-center source default channel snmpagent debug state off log
state off trap state off
[Sysname] info-center source vlan channel snmpagent log level emergencies
state on
1.1.15 info-center synchronous
Syntax
info-center synchronous
undo info-center synchronous
View
System view
Parameter
None
Description
Use the
info-center synchronous
command to enable synchronous information
output, so that if system information (such as log information) is output when the user is
inputting information, the command prompt and the input information are echoed after
the output (note that, the command prompt is echoed in command edit state but is not
echoed in interactive state).
Use the
undo info-center synchronous
command to disable synchronous
information output.
By default, the synchronous information output function is disabled.
