Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-17
View
System view
Parameter
max-retry-version-value
: Maximum number of times that a switch sends version
request packets to a user. This argument ranges from 1 to 10.
Description
Use the
dot1x retry-version-max
command to set the maximum number of times that
a switch sends version request packets to a user.
Use the
undo dot1x retry-version-max
command to revert to the default value.
By default, a switch sends version request packets to a user for up to 3 times.
After a switch sends a version request packet to a user, it sends another version
request packet if it does receive response from the user after a specific period of time
(as determined by the client version request timer). When the number set by this
command has reached and there is still no response from the user, the switch
continues the following authentication procedures without sending version requests.
This command applies to all the ports with the version checking function enabled.
Related commands:
display dot1x
,
dot1x timer
.
Example
# Configure the maximum number of times that the switch sends version request
packets to be 6.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x retry-version-max 6
1.1.14 dot1x re-authenticate
Syntax
dot1x re-authenticate
[
interface interface-list
]
undo dot1x re-authenticate
[
interface interface-list
]
View
System view/Ethernet port view
Parameter
interface-list
: Ethernet port list, in the form of
interface-list=
{
interface-type
interface-number
[
to
interface-type interface-number
] } &<1-10>, in which
